Do Hot Water Heaters Need To Be Flushed? Why?

award

Do Hot Water Heaters Need To Be Flushed? Why?

Most of us tend to take our hot water system for granted. We use hot water in various areas of our homes multiple times daily. Unfortunately, even these robust units have a specific service life. Good quality systems can last for between 8 and 10 years; however, if you maintain them a well, they can last a little longer than that.

If you find that your hot water runs out right in the middle of a shower, you know that something isn’t right with the unit.  We at Better Plumbing recommend that one of the best ways to ensure that you get the best performance and efficiency from your system is to maintain the unit in good condition. An essential maintenance task is flushing the system annually.

Why you need to flush your hot water heater

The water that comes to your property from the mains supply may be drinkable and clean however it does contain some amount of minerals which tend to accumulate over a period in the hot water tank and the plumbing system. If you have hard water on your property, the mineral content will be higher, which also means that the sedimentation build-up will be more.

Signs of Sediment Buildup

Common signs that you need to flush your hot water tank:

  • If you find that the water tank is clogged and there is too much sediment, you will notice that the water flow has reduced.
  • You may also have less hot water than you usually did.
  • Sediment flowing out of the drain valve.

In all of the situations, you must get the hot water system inspected and flushed thoroughly. Apart from the inconvenience of insufficient hot water from a blocked system, the sediment results in corrosion of the tank.  If that happens, you will have to replace the entire unit. However, if you get the hot water tank flushed at least annually, this problem can be prevented to a great extent.

How to flush a hot water system?

Steps to follow while flashing a hot water system:

  • Turn off the water supply and electricity to the tank.
  • Open the drain valve on the tank or run a tab to drain all the water from the unit.
  • Once it is empty, you can fill it up once more, and you will be good to go.
  • Turn the water back on and the power to continue using the unit.
  • If you still find that there is some amount of sedimentation in the flow of water, refill and drain the tank a couple of times. It will help to clear out the rest of the sediment.

It is a good idea to hire the services of professionals like us that provide hot water system maintenance. In addition to using the tank, we will also carry out various other maintenance and necessary repairs.

For any more information, feel free to contact  Better Plumbing on this number – 0488 802 916. We offer same-day bookings and service, and you can send us your service request through this Contact Us form. Our team will contact you as soon as possible.

Why Is My Water Heater Leaking From The Overflow Pipe?

Many people find that the overflow pipe on the water heater leaks continuously. One of the primary reasons for this problem is the temperature-pressure relief valve. This valve is attached to the unit, and it maintains or controls the water pressure. When there is a build-up of excessive pressure inside your hot water system, the valve helps to relieve that pressure.

We at Better Plumbing are a leading company in this industry, providing high-quality services to commercial and residential customers across the region. Regardless of what type of problem you are facing with hot water system may be here to help. Your hot water system has to function correctly, and the pressure of the water needs to be maintained correctly as well.

The temperature-pressure relief valve or TRP is attached to the discharge pipe that is a link to the hot water heater. Sometimes the hot water heater pipe begins to leak from the top, and that is where the TRP valve comes into the picture. If you have water flowing out of the overflow pipe continuously, it is necessary to check this valve.

If you want to maintain the safety of your hot water unit, you need to make sure that the TRP valve is in good condition at all times. It will help to maintain the pressure inside the pipes and prevent them from leaking or becoming damaged in any way.

How to Check the TRP Valve

When you find that hot water is leaking from the overflow pipe, you must act immediately and inspect the system’s TRP valve. One of the first things to do is to stop the hot water from leaking out of the overflow pipe. These are the steps to follow:

  • Remove the discharge pipe from TPR valve.
  • Make sure that your hands are protected from the rush of hot water that would come from the TRP valve.
  • If the hot water does not spout out, it means that the valve is non-functional.
  • You can try to do this check one more time.
  • If it does not work again, you would have to replace the TRP valve.

When it comes to maintaining the system’s safety, you must check the overflow valves of your water heater intermittently.

Preventive Plumbing Maintenance

One of the best ways to make sure that all of the plumbing systems and installations on a property are in good condition is to hire the services of experienced plumbers for preventive plumbing maintenance. As part of the services, the experts will visit your property at specific intervals and inspect all of the systems, including the TRP valve and the hot water unit.

These regular plumbing maintenance visits are a good time for other plumbers to check all of the systems. If they find any problems, they will inform you about them, and you can get the replacement or repair work done from them at that point. Timely repairs go a long way in ensuring the efficiency, functionality and safety of your plumbing system.

We at Better Plumbing are here to handle all your big and small plumbing requirements. For any more information, feel free to contact us on this number – 0488 802 916. We offer same-day bookings and service, and you can send us your service request through this Contact Us form. Our team will contact you as soon as possible.

Who Pays For A New Hot Water System In A Rental Property?

Plumbing repairs and maintenance responsibilities are always a common point of contention between tenants and landlords. However, both of these parties have a specific role to play during the tenancy.

When it comes to the maintenance and repairs of any installations and features on rental premises, there can be confusion about which person is responsible for what. Both parties must be aware of the individual legal obligations and what their role is in the maintenance of specific installations and appliances.

About Hot Water System Replacement on a Rental Property

We at Better Plumbing offer high-quality solutions for different types of rental premises. Here is some information that can help:

  • Before any tenant moves into that property, the landlord needs to make sure that it is in good condition and that all the appliances, features and installations are working correctly. It should be clean and safe as well as fit for a tenant to live there.
  • In most cases, it is the landlord’s responsibility to manage installation and the maintenance and repair of gas, water, electric, and other features including roofing, ceiling windows and doors etc.
  • All these become the landlord’s responsibility unless the tenant has caused damage to any of the features.
  • The exact obligations of the landlord would be mentioned in the tenancy agreement. It is why both the parties must read and understand all the terms of the agreement thoroughly before they sign on the dotted line.
  • The tenant needs to request a condition report copy from the landlord and take photographs of all the areas before they take possession.

Landlord’s Responsibilities

Every landlord has to maintain the following fixtures and items in the condition that they were when the lease agreement was signed:

  • Premises structure
  • Equipment on the property
  • The fixtures fittings and appliances provided by the landlord relating to various services, including water, electricity, and gas. This includes a hot water system and all the plumbing attached to it.

It Is Not The Landlord’s Responsibility To Maintain These Items If:

  • The repair work is required because the tenant has misused that particular fixture or fitting.
  • The tenant is required/entitled to remove that particular fixture or fitting at the end of their lease.

Tenant’s Responsibilities

It is the tenant’s responsibility to ensure that all the fixtures fittings installations and items are in the same condition. They are required to keep the premises in good order and clean at all times.

In case of a hot water system emergency, if the landlord is not contactable, the tenant can get the repair work done after making a note of what is wrong. They need to get the opinion of a professional plumber.

However, the landlord would have to reimburse the costs of the hot water heater and installation charges. It is necessary that you contact your landlord and maintain a record of the attempts that you have made to reach them before you approach a plumber.

For any more information, feel free to contact Better Plumbing on this number – 0488 802 916. We offer same day bookings and service and you can send us your service request through this Contact Us form. Our team will contact you as soon as possible.

 

What Are The Signs That A Hot Water Heater Needs Replacement?

When it comes to water heaters, products of the leading brands will provide years of service without any trouble as long as they are maintained correctly. Typically, they have a life span of at least 10 years or more and are robust enough to endure daily use.

However, there are times when disuse, misuse, or excessive use, and age can take their toll on these systems, which means that you would have to replace the appliance. We at Better Plumbing are a leading operator in this industry and handle all types of hot water heater requirements.

 

Replace hot water

 

Signs That You Need To Replace Your Hot Water Heater

There are many indicators which tell you there is a problem with the hot water system, but not all of them indicate that a replacement is required. However, if you have noticed any of these following signs, it suggests that you might have to replace the unit:

• Your water heater has stopped functioning entirely, and there is no hot water at all.
• You get hot water very erratically, or there isn’t enough of it.
• You find rust-colored water coming from the system.
• There is a significant amount of leakage from the unit.

• There are knocking sounds coming from your heater.

If you have noticed any of these signs in your hot water system, you must call in a reliable and experienced hot water specialist in Melbourne. They will inspect the system thoroughly to determine whether there is a possibility of fixing the issue with repairs. However, most of these symptoms indicate that there are significant issues in the unit, and you might need a replacement.

Choose the Right Replacement Hot Water System

When you are getting a replacement hot water system, you must make sure that you are choosing the right one for your family is requirements. We are a company that aims to provide our clients with high-quality services. Our team of experts will provide you with detailed information about the types of systems that are available on the market, helping you make a better decision on the kind of hot water replacement system that you can buy.

For details about our hot water and other plumbing solutions, feel free to contact Better Plumbing at this number – 0488 802 916 or through this Online Form. You can also book a service via this form, and we will contact you soon to confirm the service request.

How To Find An Expert Plumber For Hot Water Heater Repair

When it comes to your hot water system, you want to be sure that it is working correctly at all times. After all, you need hot water in various areas of your home. When you invest in a unit manufactured by a credible and leading company, you can be sure that it will function seamlessly for at least 10 years as long as you have maintained it correctly.

However, there are times when the system might not function as you expect, or it may work erratically. If this happens, you need to call in experts like the ones at Better Plumbing. We are a reliable and experienced company in this industry and provide high-quality solutions to our clients.

Signs to Look Out For 

Our company can handle hot water repairs for systems of any brand and model. One of the best ways to ensure the system is fixed quickly and affordably is to call us as soon as you notice any signs of issues, such as:

  • No hot water
  • Insufficient hot water
  • Less hot water
  • Rust colored water
  • Banging sounds coming from system
  • Leakage from the tank

form-graphic

 

How to Choose a Skilled Plumber for Hot Water Repairs

 

If you have noticed any of these signs, do not hesitate to call in a skilled plumber. Since there are numerous companies in this industry, you need to be sure that you are making the right choice. Some pointers you can follow to find an expert for hot water repairs:

  • You can check with your family and friends and ask them to give their suggestions about which company would be able to provide excellent quality services.
  • Took online for companies that are experienced and reputable. It is important to read customer reviews before determining which company you want to hire.
  • Call a few companies and see how they are with providing you information. Only a company that is proactive in its approach would be able to offer excellent customer service.
  • It is also essential to hire a company that would be able to provide cost-effective solutions. After you have contacted some operators, get quotes from them for the same job. It will give you a good idea about the pricing structure that the company maintains.

For details about our hot water and other plumbing solutions, feel free to contact Better Plumbing at this number – 0488 802 916 or through this Online Form. You can also book a service via this form, and we will contact you soon to confirm the service request.

 

How To Find A Licensed Plumber In Melbourne, Australia

When you are getting any plumbing work done on your property, you must make sure that the professional you hire has the right licensing and experience. We at Better Plumbing believe that while expertise and reputation are fundamental aspects, licensing is crucial as well.

Any plumber based in Melbourne has to have the right license, and the licensing authority in the state regulates them. With this in mind, many people wonder how they would be able to find a licensed plumber in Melbourne, Australia. Here are some steps to follow:

• You can always go online and search for a local plumber in Melbourne. You will notice that many results show up on the first page when you are searching on Google. Click on a few of the companies’ websites and check what kind of services they provide. A credible company will always mention the licensing information on the website.
• If it is not mentioned there, you can still contact them and ask for it. As stated, a credible company will be happy to provide you with the information that you require. They know how important licensing is in this sector.
• However, there are other ways in which you can check whether a particular service provider is licensed or not. For example, you can visit the Victoria Building Authority website. All licensed companies that operate in this industry would be registered on this site.
• Sites like licensed trades also hold this information, and you can check whether the company name shows up there.

 

Licensed plumber

 

• After you have done these checks, you can then determine whether you want to hire a particular operator. Before making your final choice, there are some other aspects that you need to check as well:
Call the company and see whether they are happy to provide you with the information that you need. Every property owner will have particular requirements, and the company should be able to customize services for you.
• It is a good idea to check whether they provide 24/7 services. You never know when a plumbing issue would arise on your property, and you need to be sure that a skilled and licensed number will be able to provide you with prompt and efficient services.

For details about our hot water and other plumbing solutions, feel free to contact Better Plumbing at this number – 0488 802 916 or through this Online Form. You can also book a service via this form, and we will contact you soon to confirm the service request.